1740 Harmon Ave Ste C
Columbus, OH 43223
ph: 614-360-1153
fax: 614-850-0032
service
We offer a range of HP and Lexmark network laser printers that are for sale at less than half their original prices. Most of the printers are end-of-lease products between 2 and 5 years old. They have been cleaned, refurbished and tested.
In choosing a laser printer, you must consider the total cost of ownership. This includes purchase price, operating costs, support and repair costs. Most people tend to focus on the initial purchase price and do not consider other costs which can be more significant in the long run. You should pay particular attention to the cost per page of toner as you will probably spend much more money on toner cartridges than on the initial purchase of the printer. It is sensible to buy a refurbished laser printer from us because you can buy a refurbished business printer for about the same price as a new home/office model.
If you are in a large organisation with many existing printers, there is another reason to buy our refurbished laser printers. We can offer you refurbished printers of the same model as those that you already have. It is usually not possible to buy new models of the type that you have previously purchased as manufacturers change their model line-up fairly frequently. Buying more of the same model leads to a huge reduction in training, maintenance and support costs as compared with introducing a completely new model range into your environment. If you have a problem with a particular printer, you can swap it out for another one of the same model without having to load new drivers, etc.
Another reason to buy a refurbished laser printer is that you can readily buy premium remanufactured toner cartridges for them. This will save you a lot of money and save the environment a lot of damage. Premium remanufactured cartridges are not usually available for new models until they have been in service for at least a year or two: it takes time for after-market manufacturers to develop and test the new components for use in the new models. It also takes time for a reasonable supply of empty cartridges to become available for recycling.
We begin by inspecting the printer and doing a series of quality test prints to diagnose its condition. We listen for noises made by worn gears or motor bearings or out-of-round pressure rollers in the fuser. We look for evidence of leaking toner cartridges and toner spills. We insert a toner cartridge known to be good and check the page count, print quality and maintenance history as recorded on the printer. Most heavy-duty printers have a recommended maintenance interval at which a set of standard parts need to be replaced. These parts comprise a maintenance kit: typically the fuser, the transfer roller and the paper pick-up rollers. We replace these parts as necessary to insure that the printer should be able to give years of trouble free operation
We usually have between 600 and 2,000 printers in stock so that we can supply reasonable quantities of any particular model in our range. We need to service the printers before they are ready for sale and we usually have a backlog of orders. If you need a printer(s) urgently, you should call us to discuss delivery times.
Copyright this business. All rights reserved.
1740 Harmon Ave Ste C
Columbus, OH 43223
ph: 614-360-1153
fax: 614-850-0032
service
